|
Euro Style Welding Cable Quick Connector DKJ10-25 DKJ35-50 DKJ50-70 , Welder Plug & Socket, Brass Welding Cable Connector for ARC MMA Welder
| Place of Origin | China |
| Brand Name | Hansen |
| Model Number | Cable Connector |
Material Introduction
This euro-type welding cable quick connector is composed of high purity brass conductive core and thickened high-temperature resistant insulating rubber shell.
The brass connector body is precisely machined, with excellent electrical conductivity and low resistance. It delivers stable current transmission and good oxidation resistance, avoiding overheating during long-time high-current welding work.
The outer rubber sleeve is made of oil-resistant, wear-resistant and anti-aging rubber compound. It features strong insulation performance and crack resistance, effectively preventing accidental contact and insulation failure, and adapting to harsh workshop welding environments. Precision turning internal thread and set screw design can firmly clamp welding copper cables, keeping good connection even after frequent plugging and unplugging.
structions for Use
- Select the correct model before installation: DKJ10-25 for 10-25mm² welding cable; DKJ35-50 for 35-50mm² welding cable; DKJ50-70 for 50-70mm² welding cable. Match the connector with your welding machine’s rated current.
- Strip the outer insulation layer of the welding cable, fully expose the copper strands. Insert the cable into the brass terminal and tighten the fixing screw to clamp all copper wires tightly, no loose strands.
- Fit the rubber protective sleeve, align plug and socket, insert and twist to lock. Confirm full engagement before switching on the welder.
- After welding, cut off the welder power first, then rotate to unlock and separate the connector. Never pull the cable directly to disconnect.
- Daily maintenance: Keep the conductive contact surface clean. Regularly clear welding spatter, dust and oxide. Stop using immediately if rubber shell cracks or brass part deforms.
- Safety Tips: Do not exceed the rated current of each specification. Keep away from water, corrosive liquid and open flame.
